Only logged in customers who have purchased this product may leave a review.
12V Relay Module – 10A –Pair
₦ 1,500
This 6V Relay allows your to control loads with up to 10A consumption
Features:
-
- 6V Coil
- Maximum Load DC: 24V (DC) @ 10A
- Maximum Load AC: 240V (AC) @ 10A
- Maximum turn-on time: 10ms
- Maximum turn-off time: 5ms
- Easy through hole mounting arrangement
1 in stock
Related Products
-
HC-06 Bluetooth Module
₦ 9,500HC-06 Bluetooth module interfaces easily to microcontroller or Arduino with four I/O pins:
VCC, GND, TXD, RXD. The module has a status LED.
Control interface is via AT commands
Qucik View -
Arduino Double Channel Relay Module 5V/10A
₦ 3,500This product is a 2-channel relay module board with LED indicators, It can be controlled by microcontrollers such as Arduino, AVR, PIC, ARM any other microcontroller operating at 5V.
With this relay you can easily control electrical appliances, lights, etc.
Features
-
- Opto-isolated input
- This relay module is 5V active low.
- It is an 1-channel relay interface board, which can be controlled directly by a wide range of microcontrollers.
- It is also able to control various appliances and other equipment with large current.
- Relay output maximum contact is AC250V 10A and DC30V 10A.
- Can be connected directly to microcontoller GPIO pins.
- Working status indicator lights are conducive to the safe use.
Qucik View -
-
RS232 to TTL Module – MAX3232
₦ 1,500This RS232 to TTL converter allows a microcontroller or Arduino operating at 3.3V to 5V to be interfaced to RS-232 type serial port.
- MAX3232 chip
- Voltage: 3.3V/5V
Qucik View -
Dual USB Output 9V / 12V / 24V / 36V 5V DC-DC Power Supply Module
₦ 2,500This is Dual USB Output 9V / 12V / 24V / 36V Car Charger Switch 5V DC-DC Power Supply Module 3A Buck Regulator, a combo of 3A Charger and voltage checker.
The module converts input of 6-40V into a very stable 5V 3A output. The device features a 2 USB port through which you can charge your phone. While charging your device please consider that the output of this device is regulated at 5V 3A.
Simply connect this device to the power supply, the voltage can be detected in real time. When you need the phone, IPAD, MP3 and other digital products to charge, connect it to a power supply and it will start supplying 5V 3A at its output.
You can use this device which features 2 USB ports in Mobile Phones, flat-panel USB 5V powered devices and many more.
Features :
- High efficiency and low ripple.
- With USB power indicator light.
- Maximum output 3A (at the same time with two mobile phones).
- Small and handy module.
- Easy to use.
Specifications:
Input Voltage (V) 6 to 40 Output Voltage(V) 5 Output Current(A) 3 Efficiency 90%. Switching Frequency (KHz) 150 Operating Temperature (°C) -40 to +90 Length (mm) 57 Width (mm) 19 Height (mm) 19 Weight (gm) 20 Package Includes :
- 1 x Dual USB Output Car Charger Switch 5V DC-DC Power Supply Module
Qucik View -
CP2102 MICRO USB to UART TTL Module
₦ 1,5005A constant current LED driver and charger for lithium-ion battery
· 3.3V and 5V voltage output
· Supports baud rates from 300bps ~ 1Mbps
On-chip voltage regulator output voltage 3.3V
Supports data formats for 8 data bits, 1 stop bit and parity bits
Connotation 512 byte receive buffer and 512 byte transmit buffer
Support for hardware or X-ON / X-OFF handshakeQucik View -
HC-12 Wireless Serial Module Up to 1km
₦ 10,000Imagine a wireless UART port with a range of up to 1km. You are looking at it
Features
- Working voltage: 3.2V~5.5V
- Default address range: 1km
- Baud rate: 5000bps
- Default idle current: 16MA (In different working modes operating current is different)
- Module dimensions: 27.8 x 14.4 x 4mm
- Operating frequency range: 433.4-473.0MHz, up to 100 channels of communication
- The maximum transmit power: 100mW (settable)
- Default factory settings: Mode FU3, baud rate is 9600bps, communication channels CH001 (433.4M)
Qucik View
Reviews
There are no reviews yet.