Only logged in customers who have purchased this product may leave a review.
12V Relay – 10A – 1 Pair
₦ 850
The JCQ-3FF 12V Relay allows your to control loads with up to 10A consumption
Features:
-
- 12V Coil
- Maximum Load DC: 24V (DC) @ 10A
- Maximum Load AC: 240V (AC) @ 10A
- Maximum turn-on time: 10ms
- Maximum turn-off time: 5ms
- Easy through hole mounting arrangement
Out of stock
Related Products
-
Class D High Power Digital Amplifier Board – TDA7492 -2 x 50W
₦ 15,000A powerful amplifier with 50W output on 2 channels, this board allows a very powerful output to be delivered from a single rail power supply.
- Power supply: Single Supply 10-26V DC voltage
- The Maximum power: 50W per channel (8 Ohm)
- Mono power 100W (4 Ohms)
- Size: 57 mm * 70mm * 21 mm
Qucik View -
IR2110 + Free Socket
₦ 1,200The IR2110 is a high voltage, high speed power MOSFET and IGBT driver with independent high and low side referenced output channels. It is compatible with standard CMOS or LSTTL output, down to 3.3V logic.The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 500 or 600 Volts.
It can be used to in inverter, solar and other power based projects to control MOSFET transistors or IGBT devices.
Features
- Floating channel designed for bootstrap operation Fully operational to +500V or +600V
- Gate drive supply range from 10 to 20V
- Undervoltage lockout for both channels
- 3.3V logic compatible Separate logic supply range from 3.3V to 20V Logic and power ground ±5V offset
- CMOS Schmitt-triggered inputs with pull-down
- Cycle by cycle edge-triggered shutdown logic
- Matched propagation delay for both channels
- Outputs in phase with inputs
Qucik View -
5 Red LEDs + 5 Resistors
₦ 6005 Red LED with 5 330 Ohm resistors. With these, all that needs to be done is connect to Microcontroller or Arduino GPIO pins. Works fine for 5V or 3V circuits
Qucik View -
MB-102 Breadboard
₦ 1,500This MB-102 Breadboard allows you to quickly prototype your projects in minutes
Qucik View -
Micro USB to DIP Adapter- Pair
₦ 1,500These Micro USB to DIP converter boards allow easy connection of a microcontroller or arduino to a PC using standard USB interface.
It may also be used to power a device over the USB port
- 3cm x 3cm x 3cm
Qucik View -
Resistor Value Pack (140 Different Values)
₦ 10,000This resistor-value pack is a must have for every electronic lover and hobbyist. It contains most of the resistor values that are typically used. With values ranging from 1 Ohm to 4.7MOhm, you will not have to run out and get the resistor you need while tweaking your prototype.
Features:
- Very convenient and practical.
- High precision and stability.
- Very popular among the electronic lovers.
- Wide variety of metal film resistors.
Package Includes:
10 units each of 1.0Ω, 1.2Ω, 1.5Ω, 1.8Ω, 2.0Ω, 2.2Ω, 2.4Ω, 2.7Ω, 3.0Ω, 3.3Ω, 3.6Ω, 3.9Ω, 4.3Ω, 4.7Ω, 5.1Ω, 5.6Ω, 6.2Ω, 6.8Ω, 7.5Ω, 8.2Ω, 9.1Ω, 10Ω, 12Ω, 15Ω, 18Ω, 20Ω, 22Ω, 24Ω, 27Ω, 30Ω, 33Ω, 36Ω, 39Ω, 43Ω, 47Ω, 51Ω, 56Ω, 62v, 68Ω, 75Ω, 82Ω, 91Ω, 100Ω, 120Ω, 150Ω, 180Ω, 200Ω, 220Ω, 240Ω, 270Ω, 300Ω, 330Ω, 360Ω, 390Ω, 430Ω, 470Ω, 510Ω, 560Ω, 620Ω, 680Ω, 750Ω, 820Ω, 910Ω, 1KΩ, 1.2KΩ, 1.5KΩ, 1.8KΩ, 2.0KΩ, 2.2KΩ, 2.4KΩ, 2.7KΩ, 3.0KΩ, 3.3KΩ, 3.6KΩ, 3.9KΩ, 4.3KΩ, 4.7KΩ, 5.1KΩ, 5.6KΩ, 6.2KΩ, 6.8KΩ, 7.5KΩ, 8.2KΩ, 9.1KΩ, 10KΩ, 12KΩ, 15KΩ, 18KΩ, 20KΩ, 22KΩ, 24KΩ, 27KΩ, 30KΩ, 33KΩ, 36KΩ, 39KΩ, 43KΩ, 47KΩ, 51KΩ, 56KΩ, 62KΩ, 68KΩ, 75KΩ, 82KΩ, 91KΩ, 100KΩ, 120KΩ, 150KΩ, 180KΩ, 200KΩ, 220KΩ, 240KΩ, 270KΩ, 300KΩ, 330KΩ, 360KΩ, 390KΩ, 430KΩ, 470KΩ, 510KΩ, 560KΩ, 620KΩ, 680KΩ, 750KΩ, 820KΩ, 910KΩ, 1MΩ, 1.2MΩ, 1.5MΩ, 1.8MΩ, 2.0MΩ, 2.2MΩ, 2.4MΩ, 2.7MΩ, 3.0MΩ, 3.3MΩ, 3.6MΩ, 3.9MΩ, 4.3MΩ, 4.7MΩ
Qucik View
Reviews
There are no reviews yet.