Only logged in customers who have purchased this product may leave a review.
128 X 64 Graphic LCD Display
128 X 64 Graphic LCD Display
₦ 5,500
This 128 x 64 Graphic LCD Module allows you to easily display graphics and text on screen. The NT7108 controller is very popular and widely supported.
- Built-in controller (NT7108 or equivalent)
- +5V power supply
- 1/64 duty cycle
- Built-in negative voltage
- Compatible with KS0108B and KS0107B controller
Pinout
1 | V | Power supply for logic |
2 | V | Ground |
3 | V | Contrast Adjustment |
4~11 | DB0~DB7 | Data bus line |
12 | CS1 | Select Column 1~ Column 64 |
13 | CS2 | Select Column 65~ Column 128 |
14 | /RST | Controller reset signal, Active Low |
15 | R/W | Read/Write select signal |
16 | D/I | Data/ Instruction select signal |
17 | E | Enable signal |
18 | V | Negative Voltage Output |
19 | A | Power supply for B/L + |
20 | K | Power supply for B/L |
Out of stock
Related Products
-
0 out of 5
Plastic Vernier Height & Depth Gauge Caliper- 0-150mm
₦ 8,500Product Description:
This product can measure the outer diameter, inner diameter, height, depth, etc.
Features:
Electronic digital caliper Made of hardened stainless steel Internal
external and height dimensions can be easily and accurately measured Linear capacitance measurement system Zero setting at any position Lock the jaws with a small locking thumb screw Basic measurement
Functions:
external, depth and step measurements.
easy-to-read LCD display Ideal for a wide range of industrial and automotive applications.
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
I2C LCD Module + 20×4 LCD
₦ 10,250Display more with the 20X4 LCD and conserve I/O pins with this kit. Alone, the LCD can take up as much as 12 I/O pins from your microcontroller. This kit combines the LCD with an I2C converter to ease connectivity and free up those valuable I/O pins. With I2C, only 2 I/O pins are used.
Features
- Arduino compatible I2C LCD module
- Software controlled backlight
- 20 X 4 LCD displays standard ASCII characters as well as special characters
- Widely available libraries for Arduino and other microcontroller architectures
- Example code at blog.nerdshed.com.ng
Kit Contains
- 20 X 4 LCD
- I2C converter
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
MAX7219 Dot Matrix 4in1 Display Module
₦ 4,500Description:
MAX7219 Dot Matrix 4-in-1 Display Module is an integrated serial input/output common-cathode display driver, it connects the microprocessor 7-segment digital LED display with 8 digits, you can also connect a bar graph display or 64 independent LED. Thereon including a B-type BCD encoder chip, multi-channel scanning loop segment word driver, but also a static RAM 8 x 8 for storing each data. Only one external register is used to set the segment current of each LED.
Specifications and Features:-
- Dimensions: 128 x 32 x 1.5cm(LxWxH)(All 4 in 1)
- Dimension 32 x 32 x 1.5 cm (LxWxH) (Single Module)
- A single module can drive an 8×8 dot matrix common cathode
- Operating voltage: 5V
- Weight: 55 gm
- Fixing screws with 64 holes with a diameter 3mm
- Module with input and output interfaces
- Support for cascading multiple modules
Wiring Instructions:-
The left side of the module to the input port, the right to an output port.
When the control of a single module, simply input port connected to CPU
When a plurality of cascaded modules, input and output termination CPU, an input terminal of the second output end of the first module a module, the first two modules of the input terminal of the three termination modules, and so on..
Pin Description:-
- VCC 5V
- GND GND
- DIN P2.2
- CS P2.1
- CLK P2.0
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
Dual USB Voltage And Current Tester
₦ 8,250This simple device can be used to operate or test servo motors. There are 3 modes to check servos;
- Manual mode: turn the knob
- Neutral mode: make the servo go back to the neutral point
- Automatic: window wiper mode: make the servo swing like a window wiper in the biggest angle. Push button to change between modes. Lights indicate mode.
You can connect 1-3 servos simultaneously. It can also be used to check the operation of any servo motor whether fitted or not.
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
LM2596 Adjustable Step-Down Power Module With Digital Display
₦ 4,500This board carries the multipurpose LM2596 power supply and allows you deliver a regulated voltage for any electronic device without the need for soldering or a multimeter. Simply set it and hook it up. The module displays the output voltage on a built in seven segment display.
Features
- 4V-40V Input Voltage.
- Continuously adjustable output voltage range of 1.25V-37V .
- Maximum output current up to 3A
- Switch toggles between viewing output or input voltage.
- Clear Seven Segment display for showing operating voltages
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
HTC-1 Digital LCD Electronic Alarm Clock Hygrometer
₦ 5,500Description:
This HTC-1 meter can measure indoor temperature, humidity and time with reliable measurement results.
Max/min value measurement, clock alarm function, desk-top placing or wall hanging.
Widely used in indoor temperature and humidity measurement, apply to lab, cold chain transport, warehousing and other occasions.Features:
- Measuring humidity, temperature and time simultaneously, large LCD display, easy for reading.
- Memory of MAX & MIN measuring value,12-hour / 24-hour displaying system selectable.
- Temperature unit is switchable: C/F unit selectable.
- Clock alarm function, compact and light, convenient to carry,
- Desk-top placing or wall hanging, easy to use.
Specifications:
- Model:HTC-1
- Color: White
- Temperature range: Indoor &Outdoor -50~+70(-58~+158°F)
- Temperature Measuring Accuracy: ±1C / 1.8F
- Temperature Resolution: 0.1C / 0.2F
- Humidity Range: 10%RH ~ 99%RH
- Humidity Measuring Accuracy: ±5%RH
- Humidity Resolution: 1%
- Power supply:1.5Vf×1 (AAA size)
- Device dimension:10.2×9.3×2.1cm/4.02×3.66×0.83″
Package Information:
- Package Size:11 x 10 x 3.5cm / 4.3 x 3.9 x 1.4in
- Package Weight:88g / 3.1oz
Package List:
- 1 x Temperature Humidity Meter
- 1 x User Manual
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View
Reviews
There are no reviews yet.