Only logged in customers who have purchased this product may leave a review.
100W Stereo Amplifier Board With Microphone Input
100W Stereo Amplifier Board With Microphone Input
₦ 4,800
- Output power:50W+50W
- Output Impedance:4-8 Ohms
- Frequency range:20Hz-30kHz
- Microphone input
- SNR:100dB
- Number of channels: 2 (left channel,right channel)
- Power Supply: AC +/-24V (>120w) ring transformer (Please use a high power transformer or DC power supply for best output.
Package Size:36cm x 33cm x 16cm (14.17in x 12.99in x 6.30in)
Out of stock
Related Products
-
0 out of 5
CH340 USB To ESP8266 ESP-01 ESP-01S Wi-Fi Adapter Board
₦ 6,250Description:
- USB to ESP-01 adapter module has CH340G USB to TTL driver IC onboard, so you can easily use your computer to do ESP-01 functional debugging.
- Its a great programmer for the ESP-01. Its very easy to just plug it in and send AT commands, or flip the switch to program and upload a sketch from Arduino IDE. Also you don’t need a separate 3.3V power supply to power the ESP-01.
Features:
- Working voltage: 4.5V – 5.5V (On-board 3.3v LDO Regulator)
- Working current: 300mA(LDO regulator can supply)
- Selectable working mode: On-board toggle switch. UART side for serial TTL debugging by AT commands, PROG for firmware programming
- USB to serial TTL chip: CH340G
- Logic level: 3.3V
- Applications: Home automation, Sensor networks, Industrial wireless control, etc,.
Package Included:
1 X CH340 USB to ESP8266 ESP-01 ESP-01S Wi-Fi Adapter Board
Other Comments:
- 1. The ESP-01 boards are super-simplified ESP8266 and these allow for flashing during development.
- 2. This little gadget makes programming the ESP 01s a breeze. It’s a must have for installing firmware.
- 3. Not at all my first programmer for these boards, but the easiest by a landslide! No buttons to hold down or wiring to do.
- 4. This worked, didn’t try the debug ger but the upload was flawless, very easy and it didn’t seem like it would break even when I stored it in tight confines. Please make sure to set your baud to at least 115200 yes the USB will work either way, but the extra speed will help you.
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
5V Electronic Buzzer
₦ 1,000-
- 40mA Current (Max)
- 80dB at 20cm Sound Output
- 100Hz Frequency
- 26mm Diameter
- 2mm Mounting holes
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
-
0 out of 5
Arduino AT-TINY85 Digispark Board
₦ 2,000The AT-Tiny85 Board is perfect for developing projects where an Arduino would be “too much”. It allows you to perform basic I/O and computing functions and is fully compatible with the Arduino IDE.
Features
- Fully supported on Arduino IDE
- Can be powered via USB or External Source – 5V or 7-35V (12V or less recommended)
- On-board 500ma 5V Regulator
- I2C and SPI (via USI)
- PWM on 3 pins (more possible with Software PWM)
- ADC on 4 pins
- Power LED and Test/Status LED
Product InformationBrandProduct added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
USB To ESP8266 Serial Wireless Wi-Fi Module Adapter Board
₦ 6,250This USB ESP8266 adapter board which can be plugged directly to your computer allowing communication, testing and programming to be done on the module with ease.
· CH340 serial chip
· 3225 chip crystal, to enhance the stability of the serial port
Fully compatible with Windows, Mac and Linux systems
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
LM386 Amplifier + Free Socket
₦ 900LM386 is a power amplifier designed for use in low voltage consumer applications. The gain is internally set to 20 but can be configured to any value from 20 to 200. It is easy to connect for audio amplifiers and many other circuts
Features
- Good for battery powered circuits
- Minimal external parts
- Wide supply voltage range: 4V–12V or 5V–18V
- Low quiescent current drain: 4mA
- Voltage gains from 20 to 200
- Ground referenced input
- Self-centering output quiescent voltage
- Low distortion: 0.2% (AV = 20, VS = 6V, RL = 8W, PO = 125mW, f = 1kHz)
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
MP3 Decoder Board With Remote Control
₦ 3,500A highly integrated single-chip multimedia sound systems allows you to play MP3 files from a flash disk or SD card. It is also an FM player and can accept auxilliary input from a 3.5mm jack.
FEATURES
- Single decoding, Support the MP3 format music.
- Digital tube display
- Support the TF card.have the USB interface.
- Support FM radio, cable band (87.5MHZ-108.0MHZ);
- Support 5-10 meter distance infrared remote control operation
- Support for external audio input .LINE IN(AUX)
- key-press: VOL-/ AUTO / VOL+ / MODE;
- MODE key: in turn switches between USB/SD/FM/AUX.
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View
Reviews
There are no reviews yet.