Arduino Pro Mini₦ 1,850
The Arduino Pro mini is an Arduino board perfect for small applications that need to pack a bang. It has the same microcontroller as the Arduino Uno.
- ATmega328 Microcontroller
- 5 – 12V Supply Voltage
- 16 MHz
- 14 Digital GPIO Pins
- PWM Pins 6
- UART 1
- SPI 1
- I2C 1
- Analog Input Pins 6
- External Interrupts 2
- DC Current per I/O Pin 40 mA
- Flash Memory 32KB (2 KB used by bootloader)
- SRAM 2 KB
- EEPROM 1 KB
A USB to UART converter is needed to program it.Qucik View
Arduino Pro Mini and Programmer₦ 5,500
Arduino Pro Mini is one of the smallest Arduinos out there. It comes with a decent microcontroller in a small package. In this kit, we have added a USB programmer kit to remove the headache of programming the Pro Mini.
- Arduino IDE Compatible USB to UART Converter for programming
- ATmega328 running at 16MHz (5V)
- Bootloader already installed
- Max 150mA output
- Over current protected
- DC input 5V up to 12V (Via Vin)
- On board Power and Status LEDs
- Analog Pins: 8
- Digital I/Os: 14
ELM327 Mini – Bluetooth OBD-II Diagnostics Protocol Scanner – CD Included₦ 3,000
The ELM327 Bluetooth Scanner allows you to scan and disagnose OBD-II protocols and display over 3000 generic code definitions in the database. Clear trouble codes and turn off the MIL (“Check Engine” Light)
- Works with all OBD-II compliant vehicles (essentially all modern vehicles)
- Wireless (Bluetooth)
- Software included for Palm, PDA
- Software included for Windows PC
- Software included for Windows Smartphone
- Supports CAN bus
- Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
- Clear trouble codes and turn off the MIL (“Check Engine” light)
- Display current sensor data, including:
- Engine RPM
- Calculated Load Value
- Coolant Temperature
- Fuel System Status
- Vehicle Speed
- Short Term Fuel Trim
- Long Term Fuel Trim
- Intake Manifold Pressure
- Timing Advance
- Intake Air Temperature
- Air Flow Rate
- Absolute Throttle Position
- Oxygen sensor voltages/associated short term fuel trims
- Fuel System status
- Fuel Pressure
- Many more
Mini Digital LCD Indoor Thermometer and Hygrometer₦ 2,000
This mini digital thermometer and hygrometer displays ambient temperature and relative humidity
- Modern type indoor desk thermometer with hygrometer.
- Indoor temperature °C(min. or max.) and humidity (max. or min.) display.
- Clear and correct display with easy to read arabic numerals
- It is widely used for the measurement of the temperature and humidity in houses, offices, workshops, schools, markets, warehouses, etc
- Indoor temperature range: 0°C~50°C.
- Up to 0.1°C accuracy.
- Humidity range: 20%RH~95%RH.
- Powered by two button batteries. (Included)
Mini Submersible Water Pump₦ 2,000
This simple DC submersible pump allows you to pump water at a rate of up to 120L/H and operates at 3-5V
- DC Voltage: 3-6V
- Maximum lift:40-110cm / 15.75″-43.4″
- Flow rate:80-120L/H
- Outside diameter of water outlet: 7.5mm / 0.3″
- Inside diameter of water outlet: 4.7mm / 0.18″
- Diameter:Approx. 24mm / 0.95″
- Length:Approx. 45mm / 1.8″
- Height:Approx. 33mm / 1.30″
- Driving mode: Brushless DC Motor
- Continuous working life of 500 hours
Mini USB 5V USB to 3.3V DC Power Outlet₦ 1,500
This DC power outlet allows connectivity of power and data to electronic projects. It allows USB data pins (D+ and D-) to be connected to a USB capable microcontroller. It also carries a 3.3V regulator on board and allows 5V devices to be powered as well.
USB Input: 5V
DC power socket input: 5-12V
Output: 5V and 3.3VQucik View
STM8S103F3P6 Mini Dev Board₦ 1,400
This STM8S103 Minimum development board is suitable for STM8 enthusiast. It packs a lot of power in a very small package.
- 16 MHz advanced STM8 core with Harvard architecture and 3-stage pipeline
- RAM: 1 Kbyte
- 2.95 to 5.5 V operating voltage
- Internal, user-trimmable 16 MHz RC
- Internal low-power 128 kHz RC
- On-board 5V Regulator.
- Can be powered by 5V USB port
- Support SWIM programming.
- 2 Built-In LEDs Power and GPIO on pin PD3 (This should flash when you power it up)
- On board reset button
- 8K Flash Memory
- 640 bytes EEPROM
- Reflash up to 10K times