-
12V Mini Electric Solenoid Lock
₦ 10,000Electric solenoid lock adopts the principle of electromagnetism. When the current passes through the silicon, the electromagnetic lock will achieve a strong suction which tightly suck the iron, thus lock the door.
Designed with the open frame type and mount board, easy to install for electric lock or other automatic door lock. The lock tongue direction can be adjusted freely, when the black spring clip below is dismantled.
It is suitable for all kinds of door, window, box, cabinet(such as storage cabinets, savings cabinet etc). Also can be installed in the escape door or fire door electronic controlled system.
Electric solenoid lock is a high quality ultra-compact electric lock built in full copper wire, whole metal structure, small, lightweight, low power consumption, strong and durable, safe and secure.
Qucik View -
12V Relay 30A-with FS Connector Terminal
₦ 850These Single Pole Double Throw(SPDT) relays are capable of switching up to 30A loads.
Features
- Single Pole Double Throw orientation
- 12V Coil
- Max Load (30A @ 220V AC and 30A @ 28V DC)
- Comes with FS Connector type terminal for solderless connections
Qucik View -
16 Piece Screwdriver Set
₦ 1,000This 16 piece screwdriver set with interchangeale heads has you covered whenever you need to drive any of the popular fasters out there. It has flat heads (different sizes), phillips heads (diffenent sizes), allen keys and more
Qucik View -
1KG PLA 3D Printer Filament (Black)
₦ 25,000This 1.75mm Soft-Flexible PLA filament is compatible with most 3D printers and produces items that have good tensile strength and dimensional accuracy.
Specification
- Compatible with most FDM 3D Printers
- Good dimensional accuracy.
- Most popular diameter 1.75mm
- Nozzle temperature: 200-220°C.
- Build plate temperature: 40-60°C.
- Diameter dimensional accuracy +/- 0.02mm.
- Printing speed 60-90mm/s.
- Layer height 0.1-0.3mm.
- Density 1.25±0.05g/cm3.
- Smooth filament feed and extrusion.
- Odour-free, warp-free, and bubble-free.
Qucik View -
1KG PLA 3D Printer Filament (White)
₦ 25,000This 1.75mm Soft-Flexible PLA filament is compatible with most 3D printers and produces items that have good tensile strength and dimensional accuracy.
Specification
- Compatible with most FDM 3D Printers
- Good dimensional accuracy.
- Most popular diameter 1.75mm
- Nozzle temperature: 200-220°C.
- Build plate temperature: 40-60°C.
- Diameter dimensional accuracy +/- 0.02mm.
- Printing speed 60-90mm/s.
- Layer height 0.1-0.3mm.
- Density 1.25±0.05g/cm3.
- Smooth filament feed and extrusion.
- Odour-free, warp-free, and bubble-free.
Qucik View -
2 Pairs of Power Terminals
₦ 980These power terminals are excellent for terminating battery inputs, charger outputs, speaker outputs etc. The pair can be easily mounted on an enclosure containing the control circuitry with the mounting nuts. A soldering tab is also available.
Qucik View -
24MHz 8 Channel Logic Analyzer – Saleae Logic Compatible
₦ 8,000A logic analyzer is a vital tool to any embedded systems or electronics engineer. It helps you see what is really going on as voltage logic levels change some uses are:
- Protocol analysis (SPI, UART, I2C, proprietary protocols)
- Microcontroller debugging (interrupts and debug without breakpoints)
- Reverse engineering.
- Data logging.
- Performance tuning.
Sampling rate up to: 24 MHz
The logic for each channel sampling rate of 24M / s. General applications around 10M, enough to cope with a variety of occasions.8-channel:
Logic eight inputs – can be collected at the same time they signal analysis, such as I2C, UART, sampling and analysis.10 billion samples:
The logic can sample up to 100 100 million everything, so you capture even the most elusive events.Voltage range:
0.8V logic: 5V voltage, to accept the 5.25 V standard CMOS threshold logic low. 2.0 V logic high. The input impedance is approximately 1 MΩ to see more specifications (10 pF)Qucik View -
25-Drawer Multi Use Storage Cabinet
₦ 9,000This electronic component storage box allows electronic components to be easily organized into different compartments:
- Can be used to store nails
- 25 Transparent Drawers
- Durable build
- Wall mountable
- Easily Stackable
- Height (22cm) X Width (30cm) X Depth (12cm)
Qucik View -
30-Drawer Multi Use Storage Cabinet
₦ 11,000This electronic component storage box allows electronic components to be easily organized into different compartments:
- Can be used to store nails
- 25 Transparent Drawers
- Durable build
- Wall mountable
- Easily Stackable
Qucik View -
39-Drawer Multi Use Storage Cabinet
₦ 17,000This electronic component storage box allows electronic components to be easily organized into different compartments:
- Can be used to store nails
- 39 Transparent Drawers with
- Durable build
- Wall mountable
- Easily Stackable
This cabinet can also be used to organize jewelry and other small items
Qucik View -
40 Pin Header Connector – 5 Pieces
₦ 1,500Header connectors always come in handy, wether the connection is for an LCD, Sensor, Module or even to another board, these breakable 40 pin header connectors will serve the purpose:
-
- A set of 5 headers.
- Number of Pins: 40
- Pin Spacing: 0.1″ (2.54 mm) -Standard width between DIP chip pins
- Pin Length: 11.5 mm
Qucik View -
-
40 Wire Ribbon Cable -40Pins
₦ 3,000These ribbon cables are most useful in connecting LCDs, Modules or other boards. Each cable has crimped 40 cables connected to a housing.
Ribbon cables greatly simplify the task of connecting things up by eliminating the need for soldering.
Qucik View