A9G GSM/GPRS GPS/DBS Module₦ 15,000
The A9G module is a multi-function development board based on the Ai-Thinker A9G GPRS/GSM+GPS/BDS module, The A9G is ideal for IoT applications especially battery powered ones since it has Lithium-Ion battery charge management on board.
- Quad band-GSM/GPRS 800/900 / 1800 / 1900MHz
- Integrated Power Management Unit: Lithium battery charge management, integrated DC-DC and LDOs.
- 29 GPIO Pins.
- Standard AT-Command interface
- Can be powered via USB
- GPS/BDS dual-mode positioning function.
- Microphone and speaker interfaces.
- USB communication interface.
- Multiple user buttons.
- TF card slot.
- Acceleration sensor.
- SPI, I2C2, ADC interface.
Possible product applications: GPS trackers, IoT Data Interface, GSM Modem SMS based application.Qucik View
Bi-Directional 4 Channel Logic Level Converter₦ 1,500
This tiny logic level shifter features four bidirectional channels, allowing for safe and easy communication between devices operating at different logic levels. It can convert signals as low as 1.5 V to as high as 18 V and vice versa, and its four channels are enough to support most common bidirectional and unidirectional digital interfaces, including I²C, SPI, and asynchronous TTL serial.Qucik View
FPM10A Fingerprint Reader Sensor Module₦ 10,000
Optical fingerprint sensor with UART interface can be easily connected to micro-controller or Single board computer for authentication and security functionality. Easily Secure your project with bio-metrics – this all-in-one optical fingerprint sensor will make adding fingerprint detection and verification super simple. Up to 162 fingerprints can be stored in the on-board FLASH memory.Qucik View
MCP2515 CAN Bus Module₦ 2,600
The MCP2515 Controller Area Network bus module allows connections to CAN networks and has an easy to use SPI interface. Many machinery use CAN to communicate such as cars, via OBD. Fully Arduino compatible libraryQucik View
MT8870 DTMF Voice Decoding Module₦ 2,500
The MT8870 module is a low power device DTMF decoder chip. It is a complete DTMF receiver integrating both the band-split filter and digital decoding functions. This module is suitable for modem interfaces, mobile radios and other DTMF related applications.
The MT8870 module decodes DTMF signals from an audio source and it is suitable for remote monitoring applications, telephone answering machines and more.Qucik View
Renesas X9C103S Digitally Controlled Potentiometer₦ 1,500
This is DC 3-5V X9C103S Digital Potentiometer Board Module. The X9C103 are digitally controlled (XDCP) potentiometers. The device consists of a resistor array, wiper switches, a control section,
and non-volatile memory. The wiper position is controlled by a three-wire interface.Qucik View
SIM808 GSM GPRS + GPS Module₦ 20,500
SIM808 module is a complete Quad-Band GSM/GPRS module which combines GPS technology for satellite navigation. The compact design which integrated GPRS and GPS in a SMT package will significantly save both time and costs for customers to develop GPS enabled applications. Featuring an industry-standard interface and GPS function, it allows variable assets to be tracked seamlessly at any location and anytime with signal coverage.Qucik View
Single Channel Amplifier Board – 18W – TDA2030A₦ 1,500
This TDA2030A audio power amplifier can help in the design of any audio circuit in need of extra amplification. Simply connect power and an input signal and have a boost in your audio project. Can be used with FM receivers, audio recording chips, microcontroller PWM output, etc.Qucik View
Single Phase Voltage Transformer Module₦ 2,000
Single-phase AC output module equipped with ZMPT101B series of high precision voltage transformer and high precision op-amp current. Modules can be measured within 250V AC voltage, the corresponding output mode can be adjusted.Qucik View
Solid State Relay Module – SSR 40DA₦ 5,000
A solid state relay (SSR) allows you to control high-current AC loads from lower voltage DC control circuitry. Solid state relays have several advantages over mechanical relays. One such advantage is that they can be switched by a much lower voltage and at a much lower current than most mechanical relays. Also, because there’s no moving contacts, solid state relays can be switched much faster and for much longer periods without wearing out.
This particular SSR can switch current loads of up to 40A with a 3-32V DC input and a zero cross trigger control method. Each one of these relays is equipped with four screw terminals (for use with ring or fork connectors) and a plastic cover that slides over the top of the relay to protect the terminals.Qucik View
Speed Recognition, Voice Recognition Module V3₦ 35,000
SRVR V3 Module is a compact and easy-control speaking recognition board.
This product is a speaker-dependent voice recognition module. It supports up to 80 voice commands in all. Max 7 voice commands could work at the same time. Any sound could be trained as command. Users need to train the module first before let it recognizing any voice command.
This board has 2 controlling ways: Serial Port (full function), General Input Pins (part of function). General Output Pins on the board could generate several kinds of waves while corresponding voice command was recognized.Qucik View
Step-Up Step-Down Constant Voltage Constant Current Converter Module₦ 2,200
This module has the popular LM2596 (Buck Reducing) and LM2577 (Boost Up) power converters on board. It is therefore able to step-up or step-down power from a variety of PC power sources and deliver steady power to a load.Qucik View