-
12V Lead Acid Battery – 7AH
₦ 15,000These 12V lead acid batteries are excellent back-up and power devices for solar, inverter or other power projects. Works perfectly for UPS, Small inverter, power supply for alarm systems, emergency lamps.
- 12AH
- 7AH battery capacity (7000mAH)
- 6 x 2.6 x 3.7 inches
Check out our battery charging boards to help you easily charge this battery.
Qucik View -
2 x 2032 Coin Cell Battery Holder – 6V Output with On & Off switch
₦ 2,000This battery holder with On/Off Switch carries two CR2032 coin cells with 30cm black and red leads! Perfect for robotic ,electronic and communication projects
- Very compact design
- Holds Two CR2032 coin batteries
- High Quality Plastic
- Perfect for soldering
- On and Off Switch
Qucik View -
3V to 5V USB Output Charger Step up Power Module
₦ 2,000This module is used as a DC-DC booster, converting 3V to 5V. With the aid of this board, you can charge your mobile phones and power other kinds of USB devices from power sources with voltage as little as 1.5V such as batteries.
- Non-isolated step-up module (BOOST)
- Input voltage: 1-5V
- Output voltage: 5.1-5 .2 V
- Output Current: Rated 1A-1.5A
- Efficiency: Up to 96% (the higher the input voltage, the higher the efficiency)
- Switching frequency: 500KHz
- Output ripple: 30mV (MAX) 20M bandwidth (input 4V output 5.1V 1A)
- Voltage indication: LED lights with load (input voltage less than 2.7V LED indicator off)
- Operating Temperature: Industrial (-40°c to +85°c)
- Full load temperature rise: 30°c
- Quiescent Current: 130uA
- Load regulation: ± 1%
- Voltage regulation: ± 0.5%
- Dynamic response speed: 5% 200uS
- Short circuit protection: None (Please use the lithium battery with protection.)
Qucik View -
3V to 5V USB Output Step Up Power Module
₦ 2,000This module is excellent for charging mobile phones or powering other kinds of devices from 3V power sources such as Lithium Ion batteries or AA batteries. It delivers a regulated 5V output from a 3V input source.
Features:
- Input voltage: 1-5V
- Output voltage: 5.1-5 .2 V
- Output Current: Rated 1A-1.5A (single lithium input), the maximum 1.5A (single lithium input)
- Efficiency: Up to 96% (the higher the input voltage, the higher the efficiency)
- Switching frequency: 500KHz
- Input Reverse Polarity Protection: None
- Connection: Welding
- Input: IN + Postive, IN-Negative
- Output: USB Output
Can be used to easily make mobile power supply to charge and power MP3, Mobile phones or power bank from as little as a single cell.
Qucik View -
4 AA Battery Holder – 6V Output
₦ 1,500This battery box holder with wire connector, holds 4 x 1.5 V AA batteries. Allowing you to power all kinds of projects and devices with the easily available AA battery
Qucik View -
5A DC-DC CC/CV Lithium Charger LED Driver Power Module
₦ 2,500This very utilitarian board delivers constant voltage or constant current output and comes in handy as a battery charger (Lead acid or Lithium battery), LED Constant current driver, as well as other power supply needs. It is also quite chunky -deliverying up to 5A output.
-
- Output voltage: 0.8V-30V
- Input voltage: 5V-32V
- Separately adjustable voltage and current outputs
- Size: 51 * 26.3 * 14 (L * W * H) (mm)
- Operating Temperature: -40 to +85 Degrees
- Voltage Regulation: +/-2.5%
- Load Regulation: +/- 0.5%
- Output ripple: 50mV
- Switching frequency: 300KHz
- Conversion efficiency: 95% (the highest)
- Output current: adjustable maximum 5A
Qucik View -
-
6V Lead Acid Battery – 4.5AH
₦ 1,600This 6V Rechargeable battery can be used for electronic projects that need battery power or backup of any kind. They can also be used rechargeable lamp, emergency lights, alarms and alarm systems.
-
- Rechargeable sealed lead-acid non spillable
- Dimensions 2.7 X 1.8 X 3.9 inche
Qucik View -
-
9V Battery -Pack of 3
₦ 900These 9V batteries are very handy for several applications ranging from microphones, multimeters, powering Arduino or other electronic projects, etc.
3 pieces come in a pack
Qucik View -
Adjustable Power Supply Voltage Regulating/Reduction – LM 2596S
₦ 3,000Excellent for powering GSM modules, charging batteries, etc
Input: 3~ 40V; Output 1.25 ~ 35V ( Adjustable)
Max 3A Output Current
Suggest to work within 2.5A for long term use
Configurable to charge different kinds of sealed lead acid batteries.
Configurable to charge mobile phones at 5V with a very smooth output voltage.
Qucik View -
Battery Parallel Charging Board Compatible with iMAX B6 Charger Adapter
₦ 37,500Charging board can charge four batteries simultaneously. When using B6 charger with charge plate at 4A current,it takes approx. 50 min to fully charge one battery, 85 mins for two batteries, and 200 mins for four batteries. Allows easy charging of drone and RC controlled device batteries
Qucik View -
DC 3V-6V Boost Step up Power Module High-Voltage Generator
₦ 4,500Commonly used in high-pressure production, electronic DIY, product development, high-voltage electronic security and so on. The high-voltage module uses the principle of Tesla coil made of high-voltage pulse output voltage current, small size, high efficiency, simple external circuit(just plug in the switch).
This module is a small production with high-pressure science inverter transformer / booster finished module, the input terminal DC 3V – 6V can get 20KV DC high voltage (about 1-2 cm arc) at the output can be used for high school science experiments , electronic equipment, negative ion generator, high voltage source to use when making small science.
Qucik View -
L293D Multi-Motor Driver Shield
₦ 3,000The L293D multi-motor driver shield has two removable L293D integrated circuits. The module plugs directly on top of some Arduino boards such as the Arduino Uno and is perfect for many robotic and automation projects.
Qucik View
