Best Sellers
- You cannot add "Raspberry Pi Camera" to the cart because the product is out of stock.
-
Arduino Uno
₦ 16,500The Arduino Uno R3 is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip.
Additional features coming with the R3 version are:
ATmega16U2 instead 8U2 as USB-to-Serial converter.
1.0 pinout: added SDA and SCL pins for TWI communication placed near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board and the second one is a not connected pin, that is reserved for future purposes.
stronger RESET circuit.
“Uno” means “One” in Italian and is named to mark the upcoming release of Arduino 1.0. The Uno and version 1.0 will be the reference versions of Arduino, moving forward. The Uno is the latest in a series of USB Arduino boards, and the reference model for the Arduino platform.Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limit) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) PWM Digital I/O Pins 6 Analog Input Pins 6 DC Current per I/O Pin 20 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB of which 0.5 KB used by bootloader SRAM 2 KB EEPROM 1 KB Clock Speed 16 MHz LED_BUILTIN 13 Length 68.6 mm Width 53.4 mm Weight 25 g Qucik View -
Arduino Mega
₦ 35,750The Arduino Mega is just the Arduino for when you need to bring the big guns out. It has 54 GPIO, 4 UART pins, 16 Analog inputs and more
Features
- Microcontroller ATmega2560
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- DC Current for 3.3V Pin 50 mA
- Flash Memory 256 KB of which 8 KB used by bootloader
- SRAM 8 KB
- EEPROM 4 KB
- Clock Speed 16 MHz
- Resettable polyfuse that protects PC USB ports from shorts and overcurrent
Qucik View -
Arduino Camera
₦ 4,500This OV7670 Camera allows image capabilities to be added to a microcontroller or Arduino with ease. It is capable of up to 640 X 480 pixel resolution and has a widely available library.
- Photosensitive array: 640X480
- IO Voltage: 2.5V to 3.0V (internal LDO for nuclear power 1.8V)
- Power operation: 60mW/15fpsVGAYUV
- Sleep: <20μA
- Temperature Operating: -30 ? to 70 ?
- Output Formats (8): YUV/YCbCr4: 2:2 RGB565/555/444 GRB4: 2:2 Raw RGB Data
- Optical size: 1/6 “
- FOV: 25 °
- Maximum Zhen rate: 30fps VGA
- Sensitivity: 1.3V / (Lux-sec)
- SNR: 46 dB
- Dynamic range: 52 dB
- View Mode: Progressive
- Electronic Exposure: 1 line to 510 line
- Pixel Size: 3.6μm x 3.6μm
- Dark current: 12 mV / s at 60 ?
Qucik View -
Arduino Nano
₦ 9,750The Arduino Nano is a full featured breadboard-friendly Arduino board. It is based on an Atmega 328 microcontroller. Fully programmable with Arduino IDE
Key Features:
- 5V Operating Voltage
- 7-12 Volt Unregulated Supply Voltage
- 8 Analog Input Pins
- 14 Digital I/O Pins
- 32kB Flash Memory (2kB Bootloader)
- 1kB RAM
- 512 Bytes EEPROM
- UART
- SPI
- PWM
Qucik View -
Arduino Pro Mini
₦ 9,750The Arduino Pro mini is an Arduino board perfect for small applications that need to pack a bang. It has the same microcontroller as the Arduino Uno.
- ATmega328 Microcontroller
- 5 – 12V Supply Voltage
- 16 MHz
- 14 Digital GPIO Pins
- PWM Pins 6
- UART 1
- SPI 1
- I2C 1
- Analog Input Pins 6
- External Interrupts 2
- DC Current per I/O Pin 40 mA
- Flash Memory 32KB (2 KB used by bootloader)
- SRAM 2 KB
- EEPROM 1 KB
A USB to UART converter is needed to program it.
Qucik View -
Ethernet Module – ENC28J60
₦ 10,000This module allows you to add Ethernet connectivity to your projects. Based on the popular Microchip’s ENC28J60, this module will easily interface with any Microcontroller or Arduino board allowing Internet Connectivity via the Ethernet..
- Up to 10Mbps
- 5V Tolerant I/O pins
- Fully IEEE 803.2 Standards compatible
Qucik View -
20 X 4 LCD Module – Arduino Compatible
₦ 8,250This 20 X 4 LCD Module allows you to fit in a lot more text than you can on the smaller 16X4. It is however fully compatible. It has the industry standard HD44780 LCD controller.
-
- 20X4 Characters
- 5V Operating voltage
- Fully pin and code compatible with 16X2, 16X1 LCDs
- Backlight
Qucik View -
-
Arduino Buzzer Module
₦ 1,500This module allows you to produce a rich and loud sound from your microcontroller.
- 3.3 V to 5 V Operating Voltage
- 3V to 5V Control
- Works without the need of a separate transistor
- Mounting Hole
Pin Out
-
- VCC (3.3 V to 5 V)
- GND
- I/O Control
Qucik View -
Arduino CNC Shield V3.0
₦ 4,250Qucik View -
Arduino Double Channel Relay Module 5V/10A
₦ 3,500This product is a 2-channel relay module board with LED indicators, It can be controlled by microcontrollers such as Arduino, AVR, PIC, ARM any other microcontroller operating at 5V.
With this relay you can easily control electrical appliances, lights, etc.
Features
-
- Opto-isolated input
- This relay module is 5V active low.
- It is an 1-channel relay interface board, which can be controlled directly by a wide range of microcontrollers.
- It is also able to control various appliances and other equipment with large current.
- Relay output maximum contact is AC250V 10A and DC30V 10A.
- Can be connected directly to microcontoller GPIO pins.
- Working status indicator lights are conducive to the safe use.
Qucik View -
-
Arduino Ethernet Shield
₦ 23,000This Ethernet Shield which is based on the W5100 Ethernet Chip gives you an easy way to get your device Online. It is directly supported by official Ethernet Library. It adds a micro-SD card slot, which can be used to store files for serving over the network
- Operating voltage: 5V
- Input voltage: 7-12 V
- SRAM: 2 KB
- EEPROM: 1 KB
- Clock speed: 16 MHz
- DC current per I/O pin: 40 mA
- DC current for 3.3 V pin: 50 mA
- Power over Ethernet ready Magnetic jack
- MicroSD card slot
Qucik View -
Arduino Single Channel Relay Module 5V/10A
₦ 1,500This product is a 1-channel relay module board with LED indicators, It can be controlled by microcontrollers such as Arduino, AVR, PIC, ARM any other microcontroller operating at 5V.
With this relay you can easily control electrical appliances, lights, etc.
Features
-
- Diode protected input
- This relay module is 5V active low.
- It is an 1-channel relay interface board, which can be controlled directly by a wide range of microcontrollers.
- It is also able to control various appliances and other equipment with large current.
- Relay output maximum contact is AC250V 10A and DC30V 10A.
- Can be connected directly to microcontoller GPIO pins.
- Working status indicator lights are conducive to the safe use.
Qucik View -
New and Noteworthy
-
Raspberry Pi 4 (8GB RAM)
₦ 200,000Dual-display, desktop computer and robot brains, smart home hub, media center, networked AI core, factory controller, and much more
Qucik View -
Raspberry Pi 4 (4GB RAM)
₦ 175,000Dual-display, desktop computer and robot brains, smart home hub, media center, networked AI core, factory controller, and much more
Qucik View -
Raspberry Pi 4 (2GB RAM)
₦ 150,000Dual-display, desktop computer and robot brains, smart home hub, media center, networked AI core, factory controller, and much more
Qucik View -
0.5 Plastic Gear Kit – 11 Kinds
₦ 2,250Description:
This is an assorted pack of 11 different commonly used plastic gears
Features:
- Module: 0.5
- Middle aperture diameter: 2mm
- Purpose: DIY scientific small production, product design, mechanical model sample, etc.
- Calculation formula of gear diameter: gear outer diameter (addendum circle) = (number of teeth + 2) * module.
- The above gears are only suitable for 2mm shafts. Including worm, spur gear, spindle gear, crown gear, double reduction gear
Qucik View -
Plastic Gear Package – 34 Kinds
₦ 5,750Description:
34Pcs Plastic DIY Robot Gear Kit, Gearbox Motor Gear Set, Worm Gear Compatible for DIY Car Robot RC Model Helicopter Remote Control Aircraft
This is 34pcs. Gears Assorted Kit for DIY Robotics and Household Repair. The Gear Package includes a spindle, single/double crown gear, pulley, rack, bevel gear, copper gear, bushings, axles, tires, rubber bands and so on, and more accessories that you need for DIY toy cars/robots/motors.There is multipurpose use of these gears like you can use them to fix the toys, Great for DIY science and small production, product design and mechanical model.
These gears are used in laboratories, science education, DIY models and RC-airplane/helicopter repair, as well as many household repairs like old music systems etc., it is a great toolkit for promoting DIY abilities, and improving children’s, teen’s hands-on skills and divergent thinking.
- Material: Plastic.
- Colour: White, Orange.
Package Includes:
- 1 x 34Pcs Plastic Gear Assorted Kit Set with Various Gear and Axle Belt and Pulleys for DIY Car Robot Project
Qucik View -
0.5 Plastic Gear Kit – 46 Kinds
₦ 4,500Description:
This is an assorted pack of 46 different commonly used plastic gears
Gears play a huge role in much of the technology around today. For example, car engines, drills, lathes, mills, CD/DVD Drives, printers, mechanical watches, children’s toys, in fact, gears are almost everywhere there are motors and engines which produce a rotational movement.
Nylon Spur gears have significant advantages over their metal counterparts in several ways. Nylon Materials used in gears are, in general, engineering plastics such as polyacetal (POM) and MC Nylon which is essentially polyamide resin. This allows for weight reduction in machine design. They are quiet, absorb vibration and do not need lubrication.
Applications:
- They are used to reverse the direction of rotation, for example when selecting reverse in your car.
- Gears are also used to transfer rotational motion to a different axis.
- Gears are used to alter the speed of rotation which in the same way can be used to alter the end turning force or torque available
Package Includes:
- 1 x 46Pcs Plastic Gear Assorted Kit Set with Various Gear and Axle Belt and Pulleys for DIY Car Robot Project
Qucik View -
0.5 Plastic Gear Kit – 58 Kinds
₦ 5,500Description: 58Pcs Plastic DIY Robot Gear Kit, Gearbox Motor Gear Set, Worm Gear Compatible for DIY Car Robot RC Model Helicopter Remote Control Aircraft
This is 58pcs. Gears Assorted Kit for DIY Robotics and Household Repair. The Gear Package includes single/double crown gear, pulley, bevel gears and many different types and sizes of gears.There is multipurpose use of these gears like you can use them to fix the toys, Great for DIY science and small production, product design and mechanical model.
These gears are used in laboratories, science education, DIY models and RC-airplane/helicopter repair, as well as many household repairs like old music systems etc., it is a great toolkit for promoting DIY abilities, and improving children’s, teen’s hands-on skills and divergent thinking.
- Material: Plastic.
- colour: White, orange.
Package Includes:
- 1 x 58Pcs Plastic Gear Assorted Kit Set with Different Types of Gears and Pulleys for DIY Car/Robot Project
Qucik View -
0.5 Plastic Gear Kit – 72 Kinds
₦ 6,500Description:
72pcs Plastic DIY Robot Gear Kit, Gearbox Motor Gear Set, Worm Gear Compatible for DIY Car Robot RC Model Helicopter Remote Control Aircraft
This is 72pcs. Gears Assorted Kit for DIY Robotics and Household Repair. The Gear Package includes single/double crown gear, pulley, bevel gears and many different types and sizes of gears.There is multipurpose use of these gears like you can use them to fix the toys, Great for DIY science and small production, product design and mechanical model.
These gears are used in laboratories, science education, DIY models and RC-airplane/helicopter repair, as well as many household repairs like old music systems etc., it is a great toolkit for promoting DIY abilities, and improving children’s, teen’s hands-on skills and divergent thinking.
- Material: Plastic.
- colour: White, orange.
Package Includes:
- 1 x 72Pcs Plastic Gear Assorted Kit Set with Different Types of Gears and Pulleys for DIY Car/Robot Project
Package Includes:
- 1 x 75 Types of Assorted Gears Pack.
Qucik View -
Plastic Gear Package – 75 Kinds
₦ 6,750This is an assorted pack of 75 different commonly used plastic gears. It includes all types of gears of different sizes like spindle gears, worm gears, rack, and pinion gears, pulleys, and belts, bevel gears, etc. It is perfect for use in DIY Science Projects and Robotics.
Features:
- High-Quality Plastic Gear for DIY Science Projects and Robotics.
- Gears come with a standard pitch of 0.5 mod and are compatible with each other.
- The gear inner shaft diameter is 2-3mm. Fits commonly available toy dc motors.
Package Includes:
- 1 x 75 Types of Assorted Gears Pack.
Qucik View -
TTL To RS485 Hardware Automatic Control Converter Module
₦ 4,000This RS485 to TTL Module allows you to communicate to an RS-485 device, module or another microcontroller at over 1Mbps from over 1km away! This RS485 transciever can be easily interfaced to a microcontroller or Arduino
- Uses MAX485 integrated circuit
- Pinout DI,DE,RE,RD signals
- 5 Volt Operation
Qucik View -
DRV8833 TB6612FNG Step Motor Driver Module
₦ 6,750Qucik View -
Multi-Function ProtoShield Expansion Board
₦ 4,750This board allows Arduino nano I/O to be expanded. It also allows the nano to be powered from a 7-12V dc supply like an Arduino Uno.
Qucik View
