Only logged in customers who have purchased this product may leave a review.
USB To ESP8266 Serial Wireless Wi-Fi Module Adapter Board
USB To ESP8266 Serial Wireless Wi-Fi Module Adapter Board
₦ 6,250
This USB ESP8266 adapter board which can be plugged directly to your computer allowing communication, testing and programming to be done on the module with ease.
· CH340 serial chip
· 3225 chip crystal, to enhance the stability of the serial port
Fully compatible with Windows, Mac and Linux systems
Related Products
-
0 out of 5
3V to 5V USB Output Step Up Power Module
₦ 2,000This module is excellent for charging mobile phones or powering other kinds of devices from 3V power sources such as Lithium Ion batteries or AA batteries. It delivers a regulated 5V output from a 3V input source.
Features:
- Input voltage: 1-5V
- Output voltage: 5.1-5 .2 V
- Output Current: Rated 1A-1.5A (single lithium input), the maximum 1.5A (single lithium input)
- Efficiency: Up to 96% (the higher the input voltage, the higher the efficiency)
- Switching frequency: 500KHz
- Input Reverse Polarity Protection: None
- Connection: Welding
- Input: IN + Postive, IN-Negative
- Output: USB Output
Can be used to easily make mobile power supply to charge and power MP3, Mobile phones or power bank from as little as a single cell.
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
1100 Meter Long Distance NRF24L01+PA+LNA
₦ 6,000Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
XL6009 Adjustable DC-DC Booster Power Supply Module
₦ 2,250Description:-
XL6009 module is a non-isolated step-up boost voltage converter featuring adjustable output voltage, high efficiency. It converts input voltage of 5-32V DC to an output voltage of 4-38V DC.
Features:-
Wide input voltage 3V ~ 32V, optimum operating voltage range is 5 ~ 32V;
Wide Output voltage 5V ~ 35V;
Built-4A efficient MOSFET switches enable efficiency up to 94%; (LM2577 current is 3A)
High switching frequency 400KHz, can use a small-capacity filter capacitors that can achieve very good results, the ripple smaller and smaller. (LM2577 frequency only 50KHz)Test Results:-
Input 3V Output 12V 0.4A 4.8W
Input 5V Output 12V 0.8A 9.6W
Input 7.4V Output 12V 1.5A 18W
Input 12V Output 15V 2A 30W
Input 12V Output 16V 2A 32W
Input 12V Output 18V 1.6A 28.8W
Input 12V Output 19V 1.5A 28.5W
Input 12V Output 24V 1 A 24W
Vin * Iin * Efficiency = Vout * Iout
Vin: Input Voltage
Iin: Input current
Vout: Output Voltage
Iout: Output current
Technical Parameters:-
Module Properties: Non-isolated boost (BOOST)
Rectification: Non-Synchronous Rectification
Input Voltage Range: 3V ~ 32V
Output Voltage Range: 5V ~ 35V (Note: If you want to get the max voltage, you should make the input current as least 3A)
Input Current: 4A (max), no-load 18mA (5V input, 8V output, no-load is less than 18mA. Higher the voltage, the greater the load current.)
Conversion efficiency: <94% (greater the pressure, the lower the efficiency)
Switching frequency: 400KHz
Output Ripple: 50mV (the higher the voltage, the greater the current, the greater the ripple)
Load Regulation: ± 0.5%
Voltage Regulation: ± 0.5%
Operating Temperature: -40 ? ~ +85 ?
Dimensions: 43mm * 21mm * 14mm (L * W * H)
When using these modules remember that the output current will be a lot less than the input current, (remember – W = VA). For example, if you have a 10V output at 1A from a 5V input, the input current will be around 3.6A. The real-life maximum amount of power you can get out of these things is around 10W.Output current is greater than 2.5A (or output power greater than 10W) to work long hours, please add heat sink.
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
4 Channels Wireless Remote Control 315MHz -Arduino Compatible
₦ 6,000Communicate with Arduino over long distances
- 315MHz operating frequency
- Distance: approx. 50 Meters in open air
- 5V operation
- 4 Control channels
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
CH340G RS232 to TTL Serial Port Module
₦ 3,000Description:
USB To RS232 TTL CH340G Converter Module Upgrade 5v 3.3v Serial Port Module PL2303
USB to TTL CH340 module instead of PL2303 , CH340G RS232 to TTL module upgrade USB to serial port in nine Brush small plates
Features:
- Brand New original CH340G chips, the chips are STC official recommendation USB to TTL chips will not appear due to a different drive / different computer as a result of incompatibilities
- Golden appearance, quality and upscale yellow pin, pin durable than the black market, beautiful
- Not only have the power light PWR, TXD and RXD LEDs also reserved RTS, CTS location convenient and intuitive know whether the product is at work in the absence of the instrument case
- 3V3 and 5V by a short circuit risk selection
Compatibility:
- Support WINDOWS 98 / ME / 2000 / XP / Server 2003 / VISTA / Server 2008 / Win7 / Win8 32 Bit / 64
Content:
- 1pcs CH340G Module
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
RFID Kit – 13MHz RC522
₦ 2,500RC522 is a 13.56 MHz RFID reader writer module which easy to use and low cost. It can be easily hooked up to Arduino or other microcontroller (e.g. PIC, Atmel or ARM) via SPI. This kit comes with two tags so you can begin prototyping right away.
Useful for making access control for locks, vehicle anti-theft, attendance systems, etc.
The RC522 has full support for Arduino: //playground.arduino.cc/Learning/MFRC522
- Operating current :13-26mA/DC 3.3V
- Idle current :10-13mA/DC 3.3V
- SPI communication (Industry standard)
- Sleep current: less than 80uA
- Peak current: less than 30mA
- Operating Frequency: 13.56MHz
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View
Reviews
There are no reviews yet.