Only logged in customers who have purchased this product may leave a review.
DHT11 TEMPERATURE SENSOR
DHT11 TEMPERATURE SENSOR
₦ 2,500
The DHT11 is a low-cost and reliable digital temperature and humidity sensor. Digital output only. It is compatible with Arduino complete with library as well as other microcontrollers.
- 3 to 5V Operating range
- 2.5mA (max)
- 20-80% humidity readings (up to 5% accuracy)
- 0-50°C temperature readings (up to ±2°C accuracy)
- 1 Hz Maximum sampling rate
- 15.5mm x 12mm x 5.5mm
- 4 pins with 0.1″ spacing
Pins
1. VCC
2. Data
3. NC
4. Ground
Related Products
-
0 out of 5
Rain Sensor – Arduino Compatible
₦ 1,500This rain sensor can be used for all kinds of weather monitoring, and translated into digital output signals and analog. Humidity Detection Sensor Module Snow Rain raindrops Detection for Arduino
- Sensitivity can be adjusted via potentiometer LED lights up when there is no rain output is high; as soon as raindrop is detected, the output goes to ground level (0V).
- Connect to the microcontroller/Arduino ADC port to detect the size of the drops in the above rainfall. DO TTL digital outputs can also be connected to the microcontroller detects whether there is rain.
- Digital outputs (0 and 1) and analog AO voltage output; TTL-level output, TTL output valid signal is low. Driving capability 100MA so, can directly drive relays, buzzer or small fan.
Pin functions include:
- VCC(3V to 5V)
- GND
- AO (Analog Output)
- Digital Output (TTL levels)
Package Includes:
- Rain sensing pad
- Sensing PCB
- Dupont cable
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
HB100 Motion Detection Microwave Sensor Module
₦ 3,500This is a X-Band Bi-Static Doppler transceiver module. This module can be used to detect motion in projects relating to home automation, automatic doors, alarm systems and even vehicle speed detection.
Feature
Transmission frequency: 10.525 GHz
Frequency Setting Accuracy: 3MHz
Output power (minimum): 13dBm EIRP
Operating voltage: 5V 0.25V
Operating Current (CW): 60mA max., 37mA typical
harmonic emission: <-10dBm
Pulse mode:
Averagecurrent (5% DC): 2mA
Pulse Width (Min.): 5uSec
load cycles (Min.): 1%Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
MQ-5 Methane, LPG, Alcohol & Smoke Sensor – Arduino Compatible
₦ 3,500This sensor allows you to detect combustible gases in the air. It is capable of detecting flamable gases in concentrations ranging from 200-10000ppm using only one analog pin from a microcontroller.
- 5V Operation
- Detects any of the following flammable gases
- Highly sensitive to LPG and Natural Gas
- Sensitive to Alcohol
- Cooking and Cigarette Smoke
Example Application: Fire prevention system, Gas leakage detector, Gas concentration detector.
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
W1219 Thermostat Temperature Controller Switch Module + Waterproof NTC Sensor Module
₦ 6,500A digital temperature controller module with dual LED display and an inbuilt relay module for control. The cut-off temperature is set with buttons on board
- Control Range:-50~110 Celsius
- Control Precision:0.1 Celsius
- Measuring Input: NTC10K waterproof sensor L=0.5m
- High Temperature Alarm:-49~110 Celsius
- Input Voltage: DC 12V
- Output Type: relay output 10A (max)
- Return Difference Setting:0.1~30 degree Celsius
- Delay Starting:0-10min
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
Digital Capacitive Touch Sensor – TTP223B
₦ 3,000This device allows you to add touch functionality to your designs. It can be easily interfaced with an Arduino or other microcontroller GPIO pins.
Features:
- Operating Voltage: 2-5V
- Chip: TTP223B
- Response Time: 60-220ms
- PCB Size: 28x20mm
- Fully Arduino Compatible
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
MQ-3 – Alcohol Gas Sensor – Arduino Compatible
₦ 4,000This sensor allows you to detect alcohol concentration levels. Use only one analog pin to microcontroller for detection
- 5V Operation
- Highly sensitive to alcohol
- Fast response time
Example Application: Breathalyzer,Alcohol concentration detector.
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View
Reviews
There are no reviews yet.