Only logged in customers who have purchased this product may leave a review.
150W DC-DC Boost Converter – 10-32V to 12-35V
150W DC-DC Boost Converter – 10-32V to 12-35V
₦ 7,500
The module is a non-isolated step-up module (BOOST)
- Dimensions: 65 * 56.5 * 23 (length * width * high) (mm)
- Input voltage :10-32V
- Output voltage: 12-35V (adjustable)
- Output Current: 6A (MAX)
- Input Current: 10A (MAX) (Please enhance heat dissipation if more than 10A)
- Output power: natural cooling 100W (MAX), enhance heat dissipation 150W (MAX)
- Conversion efficiency: 94% (measured at Input 16V, output 19V 2.5A)
- Output Ripple: 2% (MAX) 20M-bandwidth
- Operating Temperature: Industrial (-40c to +85c) (ambient temperature exceeds 40c, lower power use, or to enhance heat dissipation)
- Full load temperature rise: 45c
- No-load current: 25mA typical
- Voltage regulation: 0.5%
- Dynamic response speed: 5% 200uS
Applications:
-
- Easily power an laptop from a 12V battery
- Power 24V loads from a simple 12V battery
- Boost up solar power for more advanced applications
Related Products
-
0 out of 5
USB to UART 5- Pin CP2102 Module Serial Converter
₦ 2,500A MUST HAVE FOR EVERY ELECTRONICS AND EMBEDDED SYSTEMS ENGINEER
TALK DIRECTLY TO MICROCONTROLLERS, GSM MODULE, GPS MODULES, BLUETOOTH AND MANY MORE VIA UART/RS232
This is a USB 2.0 to 3.3V TTL UART 5 Pin CP 2102 Module Serial Converter
Connect MCU easily to your computer
Stable and reliable chip set CP2102 USB specifications
2.0 compliant with full-speed 12Mbps
Standard USB type A male and TTL 5 Pin connector
5 pins for TXD RXD GND 3.3V 5V.
All handshaking and modem interface signals.
Baud rate: 300bps to 1.5 Mbps.
Byte receive buffer: 640 byte transmit buffer.
Hardware or X-On/X-Off handshaking support.
Event character support Line break transmission.
USB suspend states supported via SUSPEND pins.
Temperature Range : -40 to + 85
Supports windows 98, Vista, Mac OS 9, Mac OS X & Linux 2.40
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
Step-Up Step-Down Constant Voltage Constant Current Converter Module
₦ 2,200This module has the popular LM2596 (Buck Reducing) and LM2577 (Boost Up) power converters on board. It is therefore able to step-up or step-down power from a variety of PC power sources and deliver steady power to a load.
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
CH340 USB to serial RS232 converter
₦ 3,000Using CH340 chip, mainly used on the LED control card 51 single-chip microcomputer, other equipment cannot be tested one by one. Compatibility is not guaranteed. Easily realize the conversion from the computer USB interface to the universal serial port, providing a fast channel for the computer without a serial port, and using this product is equivalent to turning the traditional serial device into a plug-and-play USB device. So that desktops or notebooks without serial ports can also use various serial devices. Easy to install, no need for external power supply and physical drive, suitable for computers or laptops with USB ports that support 98//ME/2000/XP/Win7/ and above.
Features:
- 100% Brand New and high quality.
- Support remote wake-up and power management, and support RS232 serial interface( Db9)
- It allows you to use bridge or connectivity between the USB and serial port interface.
- Comes without cable
Compatible:
- For Windows 98/for SE/for ME/2000/for XP/for Vista/7/8
Specifications:
- Color: Blue
- Plug Type: USB 2.0 to 9 Pin Male RS232
- Interface: RS232
- Chipset: CH340
- Size: 67x37x17mm
Package Include:
- 1 x HL340 USB To RS232 Serial Port 9 Pin DB9 Converter USB To Com Adapter CH340 Chip Based Computer DB9 Male
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
R2323 to TTL Converter with Dupont Cable
₦ 1,500This module suitable for any 3.3v or 5v microcontroller and Arduino
• Fully compatible with existing legacy COM port software
• Output signals: VDD, TXD, RXD, CTS, RTS, GND
• Power, TX, RX LED
• Power input: 3.3V or 5VPackage List:
1 * RS232 Serial To TTL Converter Module
4 * Dupont Jumping CableProduct added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
Raspberry Pi Micro HDMI To HDMI Cable – 1.5M
₦ 5,000HDMI To HDMI Cable 1.5 Meters High Quality 4K@60 Full HD support
HDMI (High-Definition Multimedia Interface) is a compact audio/video interface for transferring uncompressed video data and compressed/uncompressed digital audio data from a HDMI-compliant device (“the source device”) to a compatible computer monitor, video projector, digital television, or digital audio device etc. HDMI is a digital replacement for existing analog video standards. some more features of HDMI cable are :
High speed data transfer.
No any software requirement.
Undermould shield helps to prevent radio frequency and 2 elector magnetic interference.
Support for 1.4 V display technologies.
Gold plated copper cntacts provide maximum conductivity and minimizes data loss.
Connectors: HDMI M TO M.
No external power requirements.
Transfer Digital Audio & Video signals at warp speed of 10.2 Gigabytes per second.
HDMI to HDMI cable is suitable for use in HDTV, Home Theater, DVD player, projector, PS3, XBox, Audio/video receiver, LCD Display and other HDMI devices .
Length – 1.5M
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
I2C LCD Converter Module
₦ 2,000Description:-
I2C Module has a inbuilt PCF8574 I2C chip that converts I2C serial data to parallel data for the LCD display.
These modules are currently supplied with a default I2C address of either 0x27 or 0x3F. To determine which version you have check the black I2C adaptor board on the underside of the module. If there a 3 sets of pads labelled A0, A1, & A2 then the default address will be 0x3F. If there are no pads the default address will be 0x27.
The module has a contrast adjustment pot on the underside of the display. This may require adjusting for the screen to display text correctly.
Features:-
- Operating Voltage: 5V
- Backlight and Contrast is adjusted by potentiometer
- Serial I2C control of LCD display using PCF8574
- Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable
- Compatible for 16×2 LCD
- This is another great IIC/I2C/TWI/SPI Serial Interface
- With this I2C interface module, you will be able to realize data display via only 2 wires.
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View
Reviews
There are no reviews yet.