• 0 out of 5

    12V Relay Module – 10A –Pair

     850

    This 6V Relay allows your to control loads with up to 10A consumption

    Features:

      • 6V Coil
      • Maximum Load DC: 24V (DC) @ 10A
      • Maximum Load AC: 240V (AC) @ 10A
      • Maximum turn-on time: 10ms
      • Maximum turn-off time: 5ms
    • Easy through hole mounting arrangement
    Quick View
    Qucik View
  • 0 out of 5

    12V Relay Module- 30A

     800

    These Single Pole Double Throw(SPDT) relays are capable of switching up to 30A loads.

    Features

      • Single Pole Double Throw orientation
      • 12V Coil
    • Max Load (30A @ 220V AC and 30A @ 28V DC)
    Quick View
    Qucik View
  • 0 out of 5

    16×2 LCD Module

     1,800

    16X2 LCD Module with Blue backlight

      • Easily controlled from any microcontroller
      • 4/8 bit communication mode
      • Special character mode
      • Blue backlight
    • HD44780 Controller
    Quick View
    Qucik View
  • 0 out of 5

    20 X 4 LCD Module – Arduino Compatible

     4,000

    This 20 X 4 LCD Module allows you to fit in a lot more text than you can on the smaller 16X4. It is however fully compatible. It has the industry standard HD44780 LCD controller.

      • 20X4 Characters
      • 5V Operating voltage
      • Fully pin and code compatible with 16X2, 16X1 LCDs
    • Backlight
    Quick View
    Qucik View
  • 0 out of 5

    3V to 5V USB Output Charger Step up Power Module

     1,000

    This module is used as a DC-DC booster, converting 3V to 5V. With the aid of this board, you can charge your mobile phones and power other kinds of USB devices from power sources with voltage as little as 1.5V such as batteries.

    • Non-isolated step-up module (BOOST)
    • Input voltage: 1-5V
    • Output voltage: 5.1-5 .2 V
    • Output Current: Rated 1A-1.5A
    • Efficiency: Up to 96% (the higher the input voltage, the higher the efficiency)
    • Switching frequency: 500KHz
    • Output ripple: 30mV (MAX) 20M bandwidth (input 4V output 5.1V 1A)
    • Voltage indication: LED lights with load (input voltage less than 2.7V LED indicator off)
    • Operating Temperature: Industrial (-40°c to +85°c)
    • Full load temperature rise: 30°c
    • Quiescent Current: 130uA
    • Load regulation: ± 1%
    • Voltage regulation: ± 0.5%
    • Dynamic response speed: 5% 200uS
    • Short circuit protection: None (Please use the lithium battery with protection.)
    Quick View
    Qucik View
  • 0 out of 5

    3V to 5V USB Output Step Up Power Module

     1,000

    This module is excellent for charging mobile phones or powering other kinds of devices from 3V power sources such as Lithium Ion batteries or AA batteries. It delivers a regulated 5V output from a 3V input source.

    Features:

    •     Input voltage: 1-5V
    •     Output voltage: 5.1-5 .2 V
    •     Output Current: Rated 1A-1.5A (single lithium input), the maximum 1.5A (single lithium input)
    •     Efficiency: Up to 96% (the higher the input voltage, the higher the efficiency)
    •     Switching frequency: 500KHz
    •     Input Reverse Polarity Protection: None
    •     Connection: Welding
    •     Input: IN + Postive, IN-Negative
    •     Output: USB Output

    Can be used to easily make mobile power supply to charge and power MP3, Mobile phones or power bank from as little as a single cell.

    Quick View
    Qucik View
  • 0 out of 5

    50W Bluetooth Audio Receiver Amplifier Module With Auxiliary Input

     5,000

    This Bluetooth audio receiver allows high quality sound to be played back via Bluetooth or auxiliary input. It can drive 4/6/8/16 Ohm speakers up to 2*25W.

    Quick View
    Qucik View
  • 0 out of 5

    5A AC Current Transformer Module

     1,850

    This electricity sensor is based on TA12-100 current transformer, which can transform AC signals of large current into small amplitude analog signals.

    Quick View
    Qucik View
  • 0 out of 5

    5A XL4015 DC-DC Step down Adjustable Power Supply Module

     1,800

    This buck DC step-down adjustable power supply module allows you to power projects and deliver up to 5A current at 1.25V to 36V

     

    • Input voltage range:4V to 38V
    • Output voltage range:1.25-36V adjustable
    • Output current: 0-5A
    • Output power: 75W
    • High efficiency up to 96%
    Quick View
    Qucik View
  • 0 out of 5

    5V 700mA 220V to 5V Regulator Module

     1,000

    This module comes in handy when you need to power you circuit from 220V mains supply.

    Features:

      • Input voltage: AC 85 ~ 265 v 50/60 hz or DC 100~ 370 v
      • Input current: 0.014A(AC220V)
      • Output voltage: DC 5V (+ / – 0.2 V)
      • Output current 700 mA
      • Power 3.5 W
      • Operating temperature -20~60°
      • Relative humidity 40-90%
      • Output power:0-4W(DC current)
    • Output efficiency: 80%
    Quick View
    Qucik View
  • 0 out of 5

    5V DC 2 Channel Solid State Relay Module

     2,000

    This is a 5V solid state relay 240V 2A, able to control sizable loads.

    Features

      • High current relay, AC250V 10A, DC30V 10A
      • 2 LEDs to indicate when relays are on
      • Works with logic level signals from 3.3V or 5V devices
      • Opto-isolation circuitry
    • PCB size: 50×45 mm
    Quick View
    Qucik View
  • 0 out of 5

    5V Solid State Relay Module

     1,500

    This solid satate relay allows easy control of electrical loads of up to 220V 2A to be easily controlled from an Arduino or other microcontroller. An added advantage of a Solid State Relay is that it has no moving parts (no coil), it makes no sound during switch operation and is much safer to combine with microprocessors since there is no flyback voltage spike.

    • 5V Omron solid state relay 240V 2A.
    • Input Power: 5V DC (160MA)
    • Input Control Signal 0-2.5V Relay is ON (Open), 3.3-5V relay is OFF(Closed)

    Module interface:

    • DC +: positive power supply (by relay voltage power supply)
    • DC-: connect power negative
    • CH: relay module signal to trigger the end (low level trigger valid)

     

    Quick View
    Qucik View