-
10 Ohm 1/4 Watt Resistors
₦ 40- Resistance: 10 Ω.
- Tolerance: 5%.
- Power rating: 1/4Watt.
Qucik View -
100 Ohm 1/4 Watt Resistor
₦ 40- Resistance: 100Ω
- Tolerance: 5%.
- Power rating:1/4Watt.
Qucik View -
1000uF 35V Radial-Lead Electrolytic Capacitor
₦ 100- Capacitance :1000uF
- Voltage-Rated : 35V
- Tolerance : ±20%
- Features : Standard General Purpose
- Maximum Temperature : 85°C
- Quantity: As requested
Qucik View -
100K ohm [100K Ω 1/4W], 1/4 Watt Resistor
₦ 40- Resistance: 100K Ω
- Film: Carbon Film
- Tolerance: 5%
- Power rating: 1/4 Watt/0.25 watt
Qucik View -
100K ohm [100K Ω 1/4W], 1/4 Watt Resistor
₦ 40- Resistance: 10K Ω
- Film: Carbon Film
- Tolerance: 5%
- Power rating: 1/4 Watt/0.25 watt
Qucik View -
100K OHM TRIMPOT VARIABLE RESISTOR 6MM
₦ 50- Resistance: 100K Ohm
- Resistance Tolerance: ±30%
- Rated Power: 0.1 W
- Type: Trimpot Potentiometer
Qucik View -
100nF Ceramic Disc Capacitor
₦ 50- Capacitance : 100nF
- Case Style : Radial Body
- Diameter : 5.5mm
- Lead Pitch : 5.0mm
- Voltage Rating : 50V
- Operating Temperature Range : -25°C to +85°
Qucik View -
10K Ohm Linear Taper Potentiometer
₦ 150- Adjustment Type: Top Adjustment
- Power: 1/2W
- Resistance: 10K OHM OHMS
- Type: Linear
- Type B
- Knurled Shaft
- Suits Most Standard knobs
- Shaft Diameter: 6mm
- Shaft Length: 10mm
- Mounting Hole: 7.5mm
- Base Diameter: 16mm
Qucik View -
10K OHM TRIMPOT VARIABLE RESISTOR 6MM
₦ 50- Resistance: 10K Ohm
- Resistance Tolerance: ±30%
- Rated Power: 0.1 W
- Type: Trimpot Potentiometer
Qucik View -
10M Ohm 0.25W Carbon Film Resistor
₦ 40- Resistance: 10M Ω
- Film: Carbon Film
- Tolerance: 5%
- Power rating: 1/4Wat
Qucik View -
10nF Ceramic Disc Capacitor
₦ 50- Quantity : 1
- Capacitance : 10nF
- Case Style : Radial Body
- Diameter : 4.5mm
- Lead Pitch : 5.0mm
- Voltage Rating : 50V
- Operating Temperature Range : -25°C to +85°C
Qucik View -
12V LED Power Indicator Module
₦ 1,500Description:
This is Four Battery Indicator LED Light XD-82B 12V Battery Level Indicator Module. This module has on-board precision voltage detection chip and power regulator chip. And on-board four battery indicator LED lights, three colours display, red, yellow, yellow, green representing 20%, 50%, 80% and 100% of the electricity. You can set aside all the way battery testing interface, and two mounting holes located. This module is ideally suited to monitoring the status of a 12V battery.
Through clever use of a series of resistors and the LM339 comparator, a visual indication of the state of a battery can been seen. As the battery depletes and the voltage begins to fade lights will begin to go off>
- Built-in precision voltage detection chip and power regulator chip.
- On board four LED battery indicators.
- Set aside all the way to the battery test interface, and two mounting holes are located.
Qucik View