• 33%
    0 out of 5

    2.4G 4CH Remote Control with Receiver Circuit Board

     10,000  15,000
    • Mode:SNRM17
    • Reach distance: open area 50 meter
    • Frequency:2.4G
    • Control: 2 motors
    • Compatible: Motor 130,260,(high power motor may burn the board)
    • Receiver board size:4.1*5.3cm
    • Input voltage:4-7v
    • Max current: input:5A
    • Uses AA*2 battery for remote control (not included)
    Quick View
    Qucik View
  • 0 out of 5

    2WD Assembly Motor Kit With Speed Encoder

     7,500

    This kit can be used to make all kinds of robotic projects

    • Simple and reliable mechanical structure
    • Built in encoder
    • Comes 4 AA battery holder and power switch
    • Size: approx. 20 x 14cm(L x W); Wheel Size:6.5cm
    Quick View
    Qucik View
  • 0 out of 5

    4 Phase Stepper Motor – 5V + Driver

     2,500

    This 5 line 4 phase stepper motor with the included driver ULN2003 board can be used to drive all kinds of projects from robotics, DIY or control and industrial applications

      • Stepper motor driver board with ULN2003.
      • A, B, C, D four-phase LED indicates the status of the stepper motor work.
    • Stepper motor with a standard interface.
    Quick View
    Qucik View
  • 0 out of 5

    4WD Robot Car Chassis with Speed Encoder

     11,000

    This kit can be used to make all kinds or robotic projects with 4 wheels mounted on a chassis

      • 2 x Car chassis (Transparent)
      • 4 x DC gear motor
      • 4 x Yellow wheels
      • 1 x 4-AA-L Battery box
      • 4 x 20 line tachometer encoder
      • 8 x Fastener
      • 1 x 3D assembly drawings (Chinese version)
    • Several pillars screw nut
    Quick View
    Qucik View
  • 0 out of 5

    DIY Acrylic Mechanics Handle Robot 4 DOF Arm Arduino

     20,000

    This is a classic 4-degree-of-freedom machine is inspired by industrial robots. The kit is suitable for guest space, college students, high school students use. You can use arduino, 51 single-chip, model remote control, etc. to control the robot.

    The product is a spare part that is not assembled.

    Quick View
    Qucik View
  • 28%
    0 out of 5

    DIY Tank Robot SN3900

     18,000  25,000
    • Good damping effect, you can press down to 0.7cm.
    • With general motors 130, support 3-8V voltage 
    • With the DC charging port at the bottom of the tail.
    • Easy to install.
    • Ideal for DIY.
    Quick View
    Qucik View
  • 0 out of 5

    Metal Gear Servo Motor – MG-90S

     3,200

    The metal gear cousin of the popular MG-90 Servo Motor

    • Weight: 13.4g
    • Dimension: 22.8*12.2*28.5mm
    • Stall torque: 1.8kg/cm (4.8V) – 2.2kg/cm (6.0V)
    • Operating speed: 0.10sec/60degree(4.8v) – 0.08sec/60degree(6.0V)
    • Operating voltage: 4.8-6.0V
    • Temperature range: 0- 55deg
    • Servo Plug: JR (Fits JR and Futaba)
    Quick View
    Qucik View
  • 28%
    0 out of 5

    Multi Servo Motor Tester

     2,500  3,500

    This simple device can be used to operate or test servo motors. There are 3 modes to check servos;

    1. Manual mode: turn the knob
    2. Neutral mode: make the servo go back to the neutral point
    3. Automatic: window wiper mode: make the servo swing like a window wiper in the biggest angle. Push button to change between modes. Lights indicate mode.

    You can connect 1-3 servos simultaneously. It can also be used to check the operation of any servo motor whether fitted or not.

    Quick View
    Qucik View
  • 0 out of 5

    NEMA 17 Motor and Coupling

     7,500

    This stepper motor and coupling pair are perfect for robotics, 3D printer and other kinds of high precision projects. 1.8° per step smooth motion. It also has a solid holding torque.

    • 5mm Shaft
    • 5mm X 5mm Coupling
    • 200 steps/rev
    • 12V Operating Voltage
    • 350mA (Max Current)
    • 1.8 degrees per step
    • Bipolar stepper motor
    • 20 N*cm, 2 Kg*cm holding torque per phase
    • 35 ohms per winding
    • 42mm X  42mm square body -M3 Mounting Screws
    Quick View
    Qucik View
  • 0 out of 5

    Servo Motor – SG-90

     2,000
    • Operating voltage: 4.8 V (~5V)
    • 180 Degrees rotation, 90 Degrees in each direction
    • 50Hz (20ms) PWM Period
    • Dimension: 22.2 x 11.8 x 31 mm approx.
    • Stall torque: 1.8 kgf·cm
    • Operating speed: 0.1 s/60 degree

     

    Quick View
    Qucik View
  • 0 out of 5

    Stepper Motor – Nema 17 + A4988 Driver

     7,900

    This stepper motor is perfect for robotics, 3D printer and other kinds of high precision projects. 1.8° per step smooth motion. The included A4988 motor driver allows you to safely, quickly and accurately working with the motor.

    • 200 steps/rev
    • 12V Operating Voltage
    • 350mA (Max Current)
    • 1.8 degrees per step
    • Bipolar stepper motor
    • 20 N*cm, 2 Kg*cm holding torque per phase
    • 35 ohms per winding
    • 42mm X  42mm square body -M3 Mounting Screws
    Quick View
    Qucik View
  • 0 out of 5

    Stepper Motor Shaft Coupler 5mm to 8mm

     1,500

    This coupler is suitable for 3D printers and other kinds of CNC projects. It mounts easily on a 5mm motor shaft allowing the motor to be coupled to another shaft.

    • Material: Aluminum Alloy
    • Coupler Height(L): 25 mm
    • Coupler Diameter: 18 mm
    • Top Shaft Diameter: 5mm
    • Bottom Shaft Diameter: 5mm
    • Screws Position: 4mm
    • Flexible Shaft Couplers 5mm*5mm

     

    Quick View
    Qucik View